805-2019 - RDS SCADA System Upgrade, PLC Replacement, and Power Reliability Upgrades

D3.1 The Work to be done under the Contract shall consist of the supply, installation, programming, testing, start-up, commissioning, training, and support for a complete SCADA system replacement, and PLC system and power reliability upgrades for the City’s RDS.

D3.2 The major components of the Work are as follows:

D3.2.1 General
(a) programming and configuration Work for the PLCs and SCADA system, including the associated FAT;
(b) mobilization and demobilization for each facility;
(c) demolition of existing equipment to be replaced, upgraded, or abandoned at all facilities;
(d) minor asbestos abatement at facilities where required;
(e) minor structural repairs as required for each facility;
(f) installation of new equipment;
(g) start-up and commissioning;
(h) training;
(i) facility and project closeout including the provision of project documentation; and
(j) technical support and warranty services during the construction and warranty period.

D3.2.2 Site Specific
(a) RDS/WTP SCADA Integration
(i) integration of the new SCADA System including, but not limited to, provision of configuration and programming and installation of associated equipment and software;
(b) TBPS
(i) SCADA workstation replacement;
(ii) PLC systems programming and replacements;
(iii) PMCM system replacement;
(iv) control panel upgrades;
(v) new instrumentation;
(vi) new Ethernet equipment and cabling;
(vii) 120 VAC UPS power distribution upgrades;
(c) SLAIF
(i) SCADA workstation replacement;
(ii) LHMI replacements;
(iii) PLC systems programming and replacements;
(iv) PMCM system replacement;
(v) control panel upgrades;
(vi) new Ethernet equipment and cabling;
(d) McPhillips RPS
(i) SCADA workstation replacement;
(ii) PLC systems programming and replacements;
(iii) PMCM system replacement;
(iv) control panel upgrades;
(v) new instrumentation;
(vi) new Ethernet equipment and cabling;
(vii) 120 VAC UPS power distribution upgrades;
(viii) 4160 VAC pump motor starter upgrades;
(e) MacLean RPS
(i) SCADA workstation replacement;
(ii) PLC systems programming and replacements;
(iii) PMCM system replacement;
(iv) control panel upgrades;
(v) new instrumentation;
(vi) new Ethernet equipment and cabling;
(vii) 120 VAC UPS power distribution upgrades;
(viii) 4160 VAC pump motor starter upgrades;
(f) Hurst RPS
(i) SCADA workstation replacement;
(ii) PLC systems programming and replacements;
(iii) PMCM system replacement;
(iv) control panel upgrades;
(v) new instrumentation;
(vi) new Ethernet equipment and cabling;
(vii) 120 VAC UPS power distribution upgrades;
(viii) 4160 VAC pump motor starter upgrades;
(g) DBPS and DCFF
(i) SCADA workstation replacements;
(ii) PLC systems programming and replacements;
(iii) PMCM system replacement;
(iv) control panel upgrades;
(v) new instrumentation;
(vi) new Ethernet equipment and cabling; and
(vii) 120 VAC UPS power distribution upgrades.

D3.3 The following shall apply to the Work:
(a) City of Winnipeg Green Building Policy: New City-Owned Buildings and major additions;
http://clkapps.winnipeg.ca/DMIS/DocExt/ViewDoc.asp?DocumentTypeId=2&DocId=5989
(b) Universal Design Policy
http://clkapps.winnipeg.ca/DMIS/DocExt/ViewDoc.asp?DocumentTypeId=2&DocId=3604
(c) Water and Waste Department Drawing Standard;
https://winnipeg.ca/waterandwaste/pdfs/dept/CAD-GIS-Specifications.pdf
(d) Water and Waste Department Electrical Identification Standard; and
https://winnipeg.ca/waterandwaste/pdfs/dept/IdentificationStandard.pdf
(e) Water and Waste Department Electrical Design Guide.
https://winnipeg.ca/waterandwaste/pdfs/dept/ElectricalDesignGuide.pdf