Basic Information

Reference Number

0000224342

Issuing Organization

The City of Winnipeg

Project Type

RFT - Request for Tender (Formal)

Project Number

345-2022.

Title

Deacon Booster Pumping Station Ultraviolet Disinfection System Upgrades

Source ID

PU.MU.MB.559625.C105181

Agreement Types

Canadian Free Trade Agreement (CFTA)

New West Partnership Trade Agreement (NWPTA)

Details

Location

Canada, Manitoba, Winnipeg

Description

D3.          SCOPE OF WORK

D3.1        The Work to be done under the Contract shall consist of retrofitting the six (6)
existing Calgon Sentinel 48 – 9 x 20 kW ultraviolet (UV) reactors, located in the DBPS.

D3.2        The major components of the Work are as follows for one (1) system to be repeated for
six (6) complete systems:
(a)   Provision of computational fluid dynamic (CFD) modeling. The Contractor is to engage De Nora
to perform the CFD modeling in order to confirm that the hydraulic conditions of the existing
piping does not interfere with the UV dose delivery of the system. If any concerns are discovered,
they are to be conveyed immediately to the Contract Administrator to be addressed as quickly as
possible.
(b)   Submission of a validation report for the system. The validation report is to be completed by
De Nora in accordance with the latest version of the United States Environmental Protection Agency
(USEPA) UV Disinfection Guidance Manual (UVDGM) considering the polychromatic bias issues (e.g.
action spectra correction factor – ASCF).
(c)    Replacement of all nine (9) sensor wells and all nine (9) UV duty sensors, supplied by De
Nora, to accommodate 90% UV transmittance (UVT) as compared to the original design of 75% UVT.
(d)   Replacement of the three (3) wiper plate assemblies, supplied by De Nora, to include a 32 mm
(1.25”) drive shaft with new wiper plates.
(e)   Replacement of the three (3) top baffles, supplied by De Nora, to accommodate 90% UVT as
compared to the original design of 75% UVT.
(f)    Modification to the existing Calgon reactors to accommodate any changes to the revised wiper
system, UV sensor wells, and UV sensors.
(g)   Replacement of the existing local programmable logic controllers (PLCs). This shall include a
one-for-one swap of components (e.g., power supplies, processors, IO Cards, communication cards,
etc.) in the control section with new Schneider PLCs, which use M580 processors.
(h)   Replacement of nine (9) DC drive boards.
(i)     Replacement of the existing Human Machine Interface (HMI) to match existing size and
minimum resolution.
(j)     Replacement of the existing Modbus Plus serial cabling between the local PLC and the UV
Master panel with new fibre optic cabling that will utilize Modbus TCP/IP communication protocol.
(k)    Additional electrical modifications such as breaker and control wiring adjustments, harmonic
mitigation, surge protection etc. as required to accommodate the modification to the existing
Calgon reactors. Refer to the De Nora drawings found in the appendix for further details and
information.
(l)     Commissioning of each reactor using the Setpoint Approach (existing licence).
(m) Final adjustment and testing of UV dose using the Calculated Dose Approach with empirical
equations provided by De Nora (updated licence).
D3.3        The funds available for this Contract are $2,100,000.00.

Dates

Publication

2022/05/19 10:39:58 AM CDT

Bid Intent

Not Available

Closing DateA - Latest Amendment

2022/06/23 12:00:00 PM CDT

Onsite Visit

2022/06/01 09:00:00 AM CDT

Contact Information

Suzanne Bird

204-986-7507

sbird@winnipeg.ca

Bid Security

Buyer Requires E-Bonding

- Bid Bond

10 %

- Performance Bond

50 %

- Labor and Materials Bond

50 %

Pre-Bidding Events

Event Type

Onsite Visit

Attendance

Recommended

Event date

2022/06/01 09:00:00 AM CDT

Location

Deacon Booster Pumping Station (DBPS)

Event Note

B3.          SITE INVESTIGATION
B3.1        Further to C3.1, the Contract Administrator or an authorized representative will be
available at the Deacon Booster Pumping Station (DBPS) at 9:00 am on June 1, 2022 to provide
Bidders access to the Site.
B3.2        The Bidder is advised to register for the Site investigation at least 48 hours in
advance by contacting the Contract Administrator (Identified in D5). Directions to the Site and
Site access procedures will be provided to the Bidder upon registration for the Site investigation.
B3.3        Bidders registered for the Site investigation must provide the Contract Administrator
with a Global Sanctions & Politically Exposed Persons (PEP) Check obtained not earlier than one (1)
year prior to the Site investigation.
(a)   The Global Sanctions & PEP Check must be obtained from Sterling Talent Solutions. Bidders
will need to setup a Sterling Talent Solutions account prior to requesting individual background
checks. This process should be done 72 hours prior to requesting the first check. The account can
be setup using the following link:
https://forms.sterlingbackcheck.com/partners/platform2-en.php?&partner=winnipegcity
Note that the check will take up to 48 hours to complete. Refer to F1.1.1 of PART F - Security
Clearance for further information.
(b)   The results of the Global Sanctions & PEP Check must be received by the Contract
Administrator directly through Sterling Talent Solutions. Bidders must set up an account with
Sterling Talent Solutions directly under their company name and grant Sterling Talent Solutions
permission to share the results of the Global Sanctions & PEP Check with the City.
B3.4        The Bidder shall not be entitled to rely on any information or interpretation received
at the Site investigation unless that information or interpretation is the Bidder’s direct
observation or is provided by the Contract Administrator in writing.
B3.5        Personal protective equipment (PPE) in good working condition, including hard hats and
safety footwear shall be worn on Site at all times.
B3.6        A mask must be worn at all times while in a City facility.
B3.7        The Bidder is responsible for inspecting the Site, the nature of the Work to be done
and all conditions that might affect his/her Bid or his/her performance of the Work, and shall
assume all risk for conditions existing or arising in the course of the Work which have been or
could have been determined through such inspection.

See more

Bid Submission Process

Bid Submission Type

Electronic Bid Submission

Pricing

Lump sum

Bid Documents List

Item Name	Description	Mandatory	Limited to 1 file
Form A	Form A: Bid/Proposal	Yes	No
Form B	Form B: Prices	Yes	No
No entries

© MERX - All rights reserved. No part of the information on this Web Site may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior permission of MERX and the Minister of the participating government department (if applicable). MERX, the Minister nor the Contracting Authority will assume responsibility or liability for the accuracy of the information contained in the publication.