Information de base

Numéro de référence

0000268703

Organisation émettrice

PCL/ED, a Joint Venture (Centre Block Rehabilitation Program)

Organisation propriétaire

PWGSC

Type de projet

DPQ - Demande de pré-qualification (Formel)

Numéro de projet

REI Package M-0007

Titre

REI Package M-0007 Fire Protection - Subcontractor Pre-Selection

Code d’identité d’origine

PP.CO.ON.984913.C106429

Type d’accord

Appel d’offres ouvert (AOO)

Détails

Emplacement

Canada, Ontario, Ottawa

Lieu du travail

Ottawa, Ontario

Description

PCL/ED, a Joint Venture, acting as the Construction Manager (CM) and Modern Niagara Ottawa, acting as the CB and PWC Mechanical Design Assist Implement (DAI) Contractors are inviting Bidders to submit their Expression of Interest to pre-qualify to bid on the Fire Protection System Vendor Pre-Selection portion of the Centre Block Rehabilitation Project. The project is located at 111 Wellington Street, Ottawa, Ontario.

The Scope of Services of this REI shall be for:

The fire protection contractor shall supply, install and commission all of the Fire Protection System for the CB and PWC Buildings. Including but not limited to:
- Commissioning will be phased to suit program requirements. The Fire Protection subcontractor may be required to re-certify components and performance of Fire Protection System prior to final handover. Further details will be provided at the RFP stage.
- Training of Operations and Maintenance staff is to be carried out in both French and English. Further details will be provided at the RFP stage.
- Operations and Maintenance documentation will be required in both French and English. Further details will be provided at the RFP stage.
- Public Works and Government Services Canada may, in its sole discretion, enter into a contract directly with the successful vendor(s), or choose to run a competitive process for the maintenance services to be rendered upon handover of the assets from PCL/ED to Canada.
The term “Fire Protection Systems” shall in general include but not be limited to, a combined sprinkler and standpipe system providing complete coverage of CB and the PWC to be designed, supplied and installed in complete compliance with the National Building Code 2020 and all applicable NFPA Standards.

The combined sprinkler and standpipe systems design will be based on hydraulic calculations prepared and stamped by the Fire Protection Subcontractor’s Fire Protection Engineer.
The sprinklers systems shall be a combination of wet, dry and pre-action type with concealed piping being welded.
The fire protection systems will interface with the CB and PWC fire alarm system and CB Interconnected Floor Space Smoke Management System.
The fire protection system shall be provided with a duplex fire pump set to be provided to serve both CB and PWC. The duplex fire pump package will be located in Level B3 of PWC.
The fire protection system shall also include multi-purpose portable recessed and wall-mounted hand-held fire extinguishers to be provided throughout CB and PWC in accordance with NFPA #10, the NBC and NFC requirements

This pre-qualification process is the first phase of a three-phase procurement process; the second phase is the Request for Qualification (RFQ) phase, and the third phase is the Request for Proposal (RFP) phase.

During the RFP Phase, the pre-qualified bidders will be invited to prepare and to submit Unit Price Tenders based on the Scope of Work (SOW) outlined in the RFP. The successful bidder will be required to enter into contract for each Scope of Work. The contract will be between the successful bidder and the Centre Block and Parliamentary Welcome Centre Mechanical Design-Assist-Implement Sub-Contractor(s).

This Request for Expression of Interest document sets out the requirements for the submission of the Bidder’s Expression of Interest and specifies the evaluation criteria and Bidder selection process for this phase.

Should there be an insufficient number of prequalified Respondents after Phase One to permit a competition in Phase Two, the CM and Mechanical DAI Sub-Contractors reserve the right to cancel

Phase Two or to modify the Phase One requirements and re-publish the solicitation using the same or a different approach.

Afficher davantage

Dates

Publication

2024-12-16 18h12:05 HNE

Intention de soumissionner

Optionnel

Date limite pour soumettre l’intention

2025-01-10 00h00:00 HNE

Échéance de la réception des questions

2025-01-08 14h00:00 HNE

Questions sont soumises en ligne

Non

Date de fermeture

2025-01-13 14h00:00 HNE

Information du contact

Ross Masters

6139782956

rmasters@pcl-ed.com

Kevin Aldridge - Project Manager - Modern Niagara

613-978-7716

kaldridge@modernniagara.com

Neil Blain

(613) 602-7160

nblain@pcl-ed.com

Processus de soumission

Type de soumission

Soumission électronique

Fixation des prix

Pas de prix

Liste de documents de la soumission

Nom de l’item	Description	Obligatoire	Limité à un fichier
Bid Documents	Documents defining the proposal	Oui	Non
Aucune entrée

Directives additionelles d’appel d’offres

SUBMISSION REQUIREMENTS

1. Number of Copies to be submitted

Submit one copy. Proponents to respond via email to:
Kevin Aldridge – Project Manager – Modern Niagara - [kaldridge@modernniagara.com]
Ross Masters - Lead Procurement Manager – PCL/ED - [rmasters@pcl-ed.com]
Neil Blain – Project Manager – PCL/ED – [nblain@pcl-ed.com]
OR Upload to MERX and contact the email distribution. Each copy of the Bidder’s EI shall include a completed and signed copy of Appendix 1 of this Expression of Interest document.
The Expression of Interest submission must clearly identify the Bidder’s name and address.

1. Closing Date and Location

Statements of Qualifications shall be accepted prior to: January 8, 2025 before 2:00:00pm (Ottawa, ON Local Time) at the email addresses listed in section 5.1. or bidders may upload to MERX and contact the email distribution.

Vendor Pre-Qualification Criteria /Eligibility shall include:

Bidder’s Expression of Interest Introduction Letter.
- Letter shall identify if the Proponent is a JV and if so, explain how the JV is structured. Describe reasoning for joint venturing for this assignment.
- Proponent shall demonstrate their understanding of the project requirements detailed in 1.2 PROJECT SCOPE and shall confirm their ability to meet these requirements.
- Letter shall confirm if the Proponent is not capable of meeting some of the eligibility criteria listed in 1.2.
- Letter shall confirm that the Proponent meets the Eligibility requirements (reference clause 3. of this REI).
- Letter shall identify which unions the bidder is affiliated with.
- Letter shall confirm that the bidder is not in a conflict-of-interest position (reference clause 3.6 of this REI).
Signed copy of Appendix 1 – Non Disclosure Agreement
Bidder’s Description of their Team.
- 1.3 PROJECT CONSIDERATIONS notes the need for a strong team to fulfill this initiative. Briefly describe your proposed team.
Bidder’s Description of Relevant Experience.
- Expressions of Interest must include a description of a company’s or individual’s relevant experience and must not exceed 500 words. A brochure may be attached.
- Previous project experience with:

Major Building Rehabilitation/Renovation Projects
Heritage Building Projects
Major new build projects
Long duration projects

Afficher davantage

© MERX - Tous droits réservés. Aucune partie des données de ce site Web ne peut être reproduite, enregistrée ou archivée ni transmise sous aucune forme que ce soit ni par mode électronique, mécanique, par photocopie, enregistrement ou autrement, sans la permission préalable de MERX et du Ministre du gouvernement participant (si applicable). Ni MERX, ni le Ministre, ni le responsable du contrat n'assumerons quelconque responsabilité et ne serons tenus responsables de quelconque dommage pour l'exactitude de l'information contenue dans la publication.