In fall of 2018, Centennial College is slated to open a new Aerospace Technology focused campus on what is the historic site of de Havilland of Canada, an indelible part of Canada's aviation heritage. The project repurposes the de Havilland building, located at 65 Carl Hall Rd., with selective demolition and new construction to create approximately 138,000 square feet of instruction space. The Aerospace Hub at Downsview Park will not only facilitate the training of students in the latest aerospace technology, but also seeks to bring together academic and industry partners to catalyze new research and development initiatives. This equipment listed in this RFQ represents one of many pieces of leading edge aerospace manufacturing, testing, or research equipment that will populate the Downsview Park Aerospace Campus. This equipment will encourage and facilitate cutting edge technological learning as well as industry led research initiatives that require high level industry standard equipment.
The vision for the Downsview Park Aerospace Campus is to be a comprehensive educational and research facility. This new development represents a major turning point for Centennial College, furthering the College’s position as a leader in avionics, aircraft maintenance and manufacturing education.
SCOPE
Centennial College is seeking supply, delivery, set up and commissioning of:
One (1) Horizontal Bandsaw that meets the following specifications:
Power
- 575/3/60 CSA,30A
- 2HP
Drive
- Variable speed drive
- Magnetic Starter
- Auto shutoff device
Blade Capacity & Supply
- Blade size: 1” X 12’
- saw comes furnished with 2 blades
Cut Capacities
Round @ 90 Degrees: 11”
Rectangular @ 90 Degrees: 14”
Mitre cuts up to 45 Degrees
Accessories
Quick Adjust Material Clamping System
Coolant System
Long Material Support Stand
One (1) Stand Mounted Pedestal Grinder that meets the following specifications:
Power
- 220V, 1 Phase, 60Hz,10A
- 1.5 HP direct drive motor
Wheel Capacity & Supply
- 2 twelve inch (12”) by 2” wheels mounted simultaneously
- supply of 2 wheels, 36 Grit and 60 Grit (12” x 2”)
Accessories
- Manual wheel dressing tool
- clear plastic eye shields, mounted
Three (3) Combination Belt / Disc Sanders that meet the following specifications:
Power
- 110V, 1 Phase, 60Hz, 1Hp,10A
Belt Capacity & Supply
- minimum 6” wide by 36”+ length belt
- minimum 9” diameter disc
- supply of 3 belts, 80 grit
Accessories
- must be stand Mounted
Three (3) Standalone HD Drill Presses that meet the following specifications:
Power
- 220/3/60 CSA, 2Hp, 30A
Structure and Capacities
- Column and table style with minimum 4.5” column diameter
- geared head with hardened and ground steel gears
- Drilling capacity in mild steel : minimum 1”
- Tapping capacity min .750
- Spindle taper #3 Morse
- Speed range 78 - 3,120
- Spindle motor - 2 speed 1.3 - 2 Hp
- Spindle stroke minimum 5”
- Table, T-slotted, approximately 15" x 20"
One (1) Vertical Toolroom Bandsaw that meets the following specifications:
Power
- 575/3/60 CSA, 2Hp, 30A
- variable speed, 2 ranges
Capacities
-Throat Depth: 20”
- Max Work Height: minimum 12”
- Table Size: Minimum 19 X 19”
- Tiltable Table
- Approximate saw blade length: 150”
- Blade width: between 1/8” to ½”
Accessories
- Work Lamp
- Blade Butt Welder
- Blade Grinder & Shear
- Chip Blower
One (1) Toolroom Lathe that meets the following specifications:
Power
- 575/3/60CSA 30A
Capacities (Minimum)
Swing over Bedways : 16”
Sing over Crosslide: 10”
Center Distance: 40”
Spindle Bore : 2”
Spindle Speeds 45 – 2000 RPM (approximate)
Spindle Motor (2 Speed Motor) : 5 HP-7.5 HP
TAILSTOCK TAPER 4 MT
Accessories
10” 3 Jaw Self – Centering Steel Chuck with key
Quick Change Tool Post Set
Tailstock Assembly
Micro Stop
Headstock Chuck Guard with Safety Interlock
Machine Lamp
2 Axis Digital Readout
Auxiliary
HPSR Exemption Letter
One (1) Tool room Manual Milling Machine that meets the following specifications:
Power Requirements
575 Volt 3 Phase 60hz 30A
Motor Size: 3HP
Capacities (minimum)
Table size: 48” x 8” T slotted
Table travel: 36” x 14” (X and Y)
Knee travel: 14” (Z)
Spindle taper: R8
Variable spindle speeds, 2 speed, ranges 70-3000
Quill travel: 5”
Manual lubrication system
2 Axis digital readout system
Auxiliary
HPSR Exemption Letter
