MANITOBA REFERENCE NUMBER: MB-MBPB-10T-00028
ISSUING DEPARTMENT: Procurement and Supply Chain
DATE ISSUED: 20/11/2024
ISSUED BY: Gurjeet Kharay
TELEPHONE: 431-336-6413
The Government of Manitoba (Manitoba) is requesting bid submissions for
the Supply & Delivery of Trailer Mounted Pressure Washer for department
of Economic Development, Investment, Trade and Natural Resources for one
time purchase.
NOTE:
For INFORMATION or item clarification, if required<(>,<)>
CONTACT: Gurjeet Kharay
Email: bids@gov.mb.ca (Enquiry only)
Please contact the individual noted above if additional information or
clarification is required on the following items.
Delivery Address:
Manitoba Conservation Warehouse
1-1383 Whyte Ave.
Winnipeg, MB R3E 1V7
Invoice Address:
Manitoba Economic Development, Investment, Trade and Natural Resources
Fisheries Branch
Box 20, 14 Fultz Blvd.
Winnipeg, MB R3J 3W3
Delivery in ___ working days or ____weeks from receipt of the order.
GENERAL TERMS & CONDITIONS:
This RFQ is subject to the Manitoba General Terms and Conditions:
https://www.gov.mb.ca/central/psc/pubs/form/MB_terms_conditions.pdf
The purchase order to be issued to the top ranked Vendor(s) is subject
to the Manitoba Purchase Order Terms and Conditions: https://www.gov.mb.
ca/central/psc/pubs/form/Manitoba_PO_Terms_Conditions.pdf
SUBMISSION TERMS AND CONDITIONS:
The Bid MUST be signed by a representative of the Bidder with the
authority to bind the Bidder. The name and title of the representative
signing the Bid should also be printed below their signature.
Vendor's e-mail address: (if available) ____________________
Quantity clarification: quantity listed contains 2 or 3 decimals.
_________________________________________________________________________
ITEM QTY DESCRIPTION DELIVERY
NO. DATE
========================================================
ITEM 10 31/03/2025
1.00 Each GSIN: N2330MATERIAL: 99665099
Requirement and Specifications:
Trailer mounted hot water high pressure gasoline powered pressure washer
and recovery system.
Unit can be same or equivalent to the following requirement
specification
- 4.7 GPM and 3500 PSI mobile hot water pressure wash system.
- Electric start gas engine (battery extra)
- 4,000 watt/ 120 VAC on board generator.
- Pressure washing gun, variable pressure wand and 4 nozzles.
- 50ft high pressure washing hose.
- Downstream chemical injection.
- 440,000 BTU diesel fired 120 VAC heating system.
- 105 CFM vacuum system with 50ft x 2" vacuum hose.
- 500 mesh/100-micron duo-polyester bag filter.
- Oil skimmer bag.
- 50 micron pleated polyester filter.
- 20 micron pleated polyester filter.
- 400-gallon water tank.
- Dual heavy gauge hose reels for inlet and high-pressure water.
- Dual axle 7000lbs. capacity trailer with electric brakes.
- Adjustable lunette hitch with safety chains.
- DOT approved LED recessed taillight.
Containment Pad:
- Durable Portable Wash water containment pad (Not to exceed 100lbs by
weight)
- Approximately 12ft by 24ft, with a 4#6-inch berm to hold water
- Poly product with UV protection
- Geo-textile ground protection pad (waterproof)<(>,<)> unless included
as part of the containment pad
- One year warranty on containment and Geo textile protection pads,
parts, labor and all costs associated with the repair or replacement.
Cover:
- All-weather cover customized to fit trailer to protect units when
stored outdoors when not in use. Must protect all trailer components
with ability to anchor to prevent wind damage to cover
Accessories to be included:
- 3 ft extender hoses. Connects trigger gun to diffuser, motor muffs and
fake a lake
- Diffuser Attachment. Converts water to low pressure, connects to
extender hose
- Narrow hose Diffusers. Used for flushing ballast tanks
- Motor Muffs
- Fake a Lake, with adjustable height
Under water boat sprayer on wheels.
========================================================
ITEM 20 31/03/2025
1.00 Each GSIN: N2330MATERIAL: 99665099
Requirements and Specifications:
Trailer mounted hot water high pressure gasoline powered pressure washer
and recovery system.
Unit can be same or equivalent to the following requirement
specification
- 4.7 GPM and 3500 PSI mobile hot water pressure wash system.
- Electric start gas engine (battery extra)
- 4,000 watt/ 120 VAC on board generator.
- Pressure washing gun, variable pressure wand and 4 nozzles.
- 50ft high pressure washing hose.
- Downstream chemical injection.
- 440,000 BTU diesel fired 120 VAC heating system.
- 105 CFM vacuum system with 50ft x 2" vacuum hose.
- 500 mesh/100-micron duo-polyester bag filter.
- Oil skimmer bag.
- 50 micron pleated polyester filter.
- 20 micron pleated polyester filter.
- 400-gallon water tank.
- Dual heavy gauge hose reels for inlet and high-pressure water.
- Dual axle 7000lbs. capacity trailer with electric brakes.
- Adjustable lunette hitch with safety chains.
- DOT approved LED recessed taillight.
Containment Pad:
- Durable Portable Wash water containment pad (Not to exceed 100lbs by
weight)
- Approximately 12ft by 24ft, with a 4#6-inch berm to hold water
- Poly product with UV protection
- Geo-textile ground protection pad (waterproof)<(>,<)> unless included
as part of the containment pad
- One year warranty on containment and Geo textile protection pads,
parts, labor and all costs associated with the repair or replacement.
Cover:
- All-weather cover customized to fit trailer to protect units when
stored outdoors when not in use. Must protect all trailer components
with ability to anchor to prevent wind damage to cover
Accessories to be included:
- 3 ft extender hoses. Connects trigger gun to diffuser, motor muffs and
fake a lake
- Diffuser Attachment. Converts water to low pressure, connects to
extender hose
- Narrow hose Diffusers. Used for flushing ballast tanks
- Motor Muffs
- Fake a Lake, with adjustable height
Under water boat sprayer on wheels.
========================================================
QUOTATION EVALUATION:
Generally, the lowest overall price of an acceptable item(s) in
accordance with the terms & conditions of the RFQ will be awarded the
order.
Quotations will also be evaluated based on suitability of unit offered
compared to the end user's needs, product specifications, delivery,
warranty, price, quality of the bidder's performance in past awards and
any other terms & conditions indicated on this RFQ.
Each product offered will be considered individually, however, the
intent is to award this RFQ to one supplier in total (if possible and
economic to Manitoba) therefore bidders should quote on all items if
possible. (Economic evaluation to be at Manitoba's sole discretion)
Failure to provide adequate information to evaluate the item offered may
be cause for rejection of your quote by the Manitoba Government
(Manitoba). Suitability selection to be at Manitoba's sole discretion.
QUALITY / ACCEPTABILITY
All products supplied are subject to inspection prior to acceptance.
Manitoba reserves the right to reject any products, after final
inspection that does not meet the specification requested.
PRODUCT OFFERED:
The product offered must meet the requirements and expectations for its
intended use.
If it is your intention to offer an item, which does not meet all the
specs/description as outlined, then you must indicate all intended
deviations or changes on the return quote.
Please indicate:
Manufacturers Name__________
Brand Name______________
Product / Style Number ________
Bidders catalogue/reference number (if applicable) ___________
NOTE: If any of the above items/features are accessories that are to be
included and installed prior to delivery. It is the supplier's
responsibility to test all systems to ensure they are functioning
properly prior to delivery.
Delivery Address:
Manitoba Conservation Warehouse
1-1383 Whyte Ave.
Winnipeg, MB R3E 1V7
Invoice Address:
Manitoba Economic Development, Investment, Trade and Natural Resources
Fisheries Branch
Box 20, 14 Fultz Blvd.
Winnipeg, MB R3J 3W3
(Unit prices include all necessary charges e.g., freight, insurance,
handling etc.)
If any charges are not included, please explain in detail any/all
charges that will be extra to the unit prices quoted and that will be
charged on the invoice.
PRODUCTS/BRANDS:
Brand names, where indicated, are shown for reference purposes only and
are not intended as endorsement of a particular product.
AUTHORIZED VENDOR:
Manitoba reserves the right, prior to any contract award, to secure
evidence to Manitoba's satisfaction that any bidder is the manufacturer,
or an authorized distributor, dealer or retailer of the goods offered
and is authorized to sell these goods in Manitoba, Canada and upon
request will provide Manitoba with written evidence thereof.
WARRANTY:
MANUFACTURER'S WARRANTY:
State warranty of units offered (as applicable to Manitoba's use).
(Manitoba's use would usually be considered commercial application not
consumer)
Product _________ months OR _______ years
Labor _________ months OR _______ years
Parts _________ months OR _______ years
Please note: During the period of the warranty offered, all labor,
transportation, parts, surcharges including shipping and brokerage will
be included. The Province of Manitoba "will not" pay additional charges
while the item(s) offered are under the above stated warranty.
Potential costs associated with the location of warranty service might
be used in the evaluation of this quote.
If the warranty offered is the Vendor's warranty in combination with or
in place of the Manufacturer's warranty<(>,<)> then a complete
explanation must be provided.
WARRANTY SERVICE/LOCATION:
Is warranty service provided on site at our premises?
Yes___ or No____
If no, indicate the location the unit must be sent to for manufacturer's
certified and/or approved warranty service.
Company name_______________________
Location (city & province) ______________
Do you have a toll-free phone number for warranty service?
Yes______ or No______
IF YES PLEASE PROVIDE: ________________________
AFTER WARRANTY SERVICE:
Is after warranty service provider the same as above?
Yes ___ or No_____
If No, please advice
Company name_______________________
Location (city & province) ______________
ACCOUNTS RECEIVABLE ADDRESS:
Due to our computerized accounts payable system please advise if your
invoice address (accounts receivable) is the same as the address for
orders / quotes shown above
YES ____ or NO ______
If NO provide complete details i.e. box #, street address, city,
province, postal code, etc. _________________
MANITOBA'S RETAIL SALES TAX LICENSE:
Are you licensed by Manitoba Finance to collect and remit?
Manitoba's Retail Sales Tax
YES_____ or NO_____
If NO disregard the following paragraph.
MANITOBA'S RETAIL SALES TAX
Is the product(s) offered subject to Manitoba's Retail Sales Tax?
YES____ or NO _____
If the quote consists of both taxable (T) and non-taxable (NT) items
please indicate T or NT opposite each item offered.
PAYMENT TERMS:
Manitoba will consider Early Payment Terms. Manitoba's standard payment
term is net thirty (30) days.
The Bidder shall specify their standard invoice term:
_____________________________
Is there any applicable discounts for early payment?
Yes _____ No _____ Initial __________
If yes, please specify:
_____________________________________________________
Does your early payment clause appear on your invoice?
Yes _____ No _____ Initial __________
YOUR QUOTATION REFERENCE # (if applicable) _________.
Proposed Delivery Address:
Delivery Address:
Manitoba Conservation Warehouse
1-1383 Whyte Ave.
Winnipeg, MB R3E 1V7
TENDERS TO BE RETURNED TO:
MERX Electronic Bid Submission www.MERX.com
